Optional Features:
- Container Neck Centering Device
- Drip Tray
-
Sanitary Raised Conveyor
|
|
|
LIQUID FILLING AT IT'S BEST |
||
|
Piston
Filler: Model SVS-J |
The SVS-J is our
smallest piston filler, with a base of 19.5" by 9.5" and weighing
approximately 35 LB. Interchangeable product cylinders range in size from .25 inches to 2 inches in diameter with a fill range from .2 to 8.5 fluid ounces. The SVS-J works well for lab use, start-up operation or small batch runs. The SVS-J has also been mounted on vertical and horizontal form-fill-seal machines. The SVS-J is used in many applications in the cosmetic, personal care and food industries. |
||
|
Piston
Filler: Model SVS |
|
||
|
Piston Filler: Model DVS
|
The DVS piston filler
model is a dual cylinder machine. It has design features and pneumatic drive system are similar to the SVS. The DVS utilizes the REB end valve, with the product cylinder and dispensing valve in a single sanitary unit. The DVS is also capable of being supplied with large ported valves. T he DVS can be supplied as a table top unit or fitted to an adjustable height stainless steel pedestal. |
![]() |
|
|
|
IVS series
|
|
|
Inline Level Filler (Pressure or Gravity) |
|||
| Automatic Filling System: Model ILS-A | REB
offers level filling systems for pressure or gravity applications
with our Model ILS series, available in configurations of 2 to 12
filling spouts and can accommodate container sizes ranging from
ounces to multiple gallons. The ILS series of level fillers can handle products ranging from thin foamy products to heavier products with viscosities similar to shampoo. These systems fill to a specified level in rigid containers and are accurate to +/- 1/16" in fill height. The ILS features a stainless steel frame and the product contact system is made of stainless steel and USDA approved plastics. We offer a selection of pump configurations based on the type of products filled and the production rated required. A fully automated system supplied with a 10 foot, powered conveyor with programmable logic controller (PLC) and container sensors control the machine functions. To accommodate a wide variety of containers, we offer three types of container indexing. Pneumatically controlled gating fingers is the standard system, providing the most versatility and faster indexing speeds. A timing screw or spiral can be used to position oval containers (which are prone to shingling) under the nozzles consistently. |
![]() |
|
| Semi Auto Filling System: Model ILS-SA | The ILS-SA is supplied with the same frame, product contact system and conveyor as the automatic model. This filling system is operator controlled and all the functions, including the nozzle spout bar movement and container indexing, are controlled by manual switches and levers. | ||
| Manual Filling System: Model ILS-M |
|
![]() |
![]() |
Rotary Piston Filler: Model RVS-18 Rotary Piston Filler: Model RVS-12 |
![]() |
|
T: 972-385-9456 F: 972-499-1898 |
|
|