DRUM & TOTE FILLER

PRODUCT APPLICATIONS FOR CI BY ODEN DRUM, TOTE AND IBC FILLERS

Applications include free flowing to viscous products, including chunky products. Fill volumes from 5 to 500 gallons at flow rates to 100 GPM with accuracies up to ±0.25% dependent upon dose size and type of product.

BENEFITS

• fills a wide range of products

• fills difficult products that change in density due to temperature variation, variance within the batch, or from batch to batch

• allows for "on-the-fly" product weight adjustments

• eliminates product waste

• nozzle positions easily

• built to last

• easy to set-up and changeover

• use with your product feed system or with an Oden supplied servo driven rotary pump based product feed unit

SYSTEM COMPONENTS AND SPECIFICATIONS

• 4 line by 20 character liquid crystal display

• operator interface mounted to a stainless steel NEMA 4 enclosure

• Endress & Hauser Coriolis mass meter

• servo pneumatic diving nozzle system, self teaching set-up

• 316L stainless steel, no-drip, positive shut-off filling nozzle

• flow rates to a maximum of 100 GPM

• accuracies up to ±0.25% dependent upon dose size and type of product

FEATURES

• handles thick and thin products

• fills 5 gallons to 55 gallon drums, IBCs and totes up to 500 gallons

• system is equipped with memory for up to fifty product and container menus

• Coriolis mass meter operation produces net weight fills and automatically compensates for products that change in density over the filling run

• all stainless steel machine construction

• "self teaching" diving nozzle system with pneumatically assisted positioning

CONFIGURATIONS

• single head unit configured as a portable system with robust industrial casters or as a fixed position unit for permanent installation

• configuration allows for direct on-pallet filling, freestanding container filling or on-conveyor filling

• available in Class 1, Division 1 Group D explosion-proof configuration

• available with vapor collection/removal system

BROCHURE

DRAWING

Semi-Automatic 2 Head Pail Filler

2 HEAD PAIL FILLERS AND CAN FILLERS -- SCALE BASED, SEMI-AUTOMATIC

• • Fill Free Flowing to Very Viscous and Abrasive Products on the Same Machine

  • Models Available to Fill a Wide Range of Container Sizes from 1 Quart to 16 Gallons

STANDARD FEATURES FOR SEMI-AUTOMATIC FILLING MACHINERY

1. Electronic digital load cell based fillers for net weight filling of liquid products.

2. Pail fillers and can fillers are available for filling rigid containers in sizes from one quart to sixteen gallons.

3. Single or multiple head designs depending on speed requirements.

4. Operator display and scale controller are mounted in a stainless steel NEMA 4 enclosure.

5. Easy operator interface access to every filler function including scale calibration, scale set points, and diving nozzle function (on diving nozzle equipped machines).

6. Non-volatile memory storage of all machine set-up data with one key "recipe" loading allows for easy parameter changes.

7. Fluid flow pathway consists of an Oden GEN2 316L stainless steel positive shutoff nozzle and stainless steel fittings in sanitary triclamp or NPT threaded connections.

8. Fast fill/slow fill (bulk and dribble) liquid fill profiling for enhanced accuracy on large containers.

9. Heavy duty stainless steel frame construction available with locking casters for easy portability.

10. Roller conveyor bed for handling and easy positioning of containers under the filling nozzle(s).

11. Pail fillers and can fillers are easily accessible with start button or foot pedal switch operation.

Air and Electrical Requirements:
Air Requirements:  80 PSI @ 2 SCFM
Electrical Requirements:  115 VAC 50-60 Hz. 15 AMPS

BROCHURE